- Overview
- Product Description
- Product Parameters
Basic Info.
Model NO.
HSD
Kind
Sleeve Compensator
Type
Horizontal
Head Code
Round
Material
Plastic
Surface Treatment
Epoxy
Customized
Customized
Certification
ISO14001, ISO9001
Warranty
12 Months
Application
Pipeline Joint Closure
Sleeve Width
200-700mm
Sleeve Thickness
2-18mm
Output Capability
250kg-1.5t/H
Transport Package
Standard Package
Specification
EN253, EN448, EN728, ISO1133, ISO8501-1. ISO9001
Trademark
HSD
Origin
Qingdao, China
HS Code
3901902000
Production Capacity
2000sets/Day
Product Description
HDPE Electic Heating Fusion Sleeve Hot Meld Tape for metal reinforced corrugated pipe
Application:
1. District thermal heating system construction,
2. Pre-insulated pipes field joint welding and oil pipes joint welding;
3. Preinsulated bonded pipe system for directly buried hot water networks;
4. Three PE/PP layers with foam jacket insulation pipes connection;
5. Steel pipes anti-corrosion etc.
Performance:
1. Waterproof; High adhesion, good airtightness, corrosion resistant capacity, long service life and convenient operation
2. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
3. Able to withstand radial forces and bending moments;
4. Able to withstand effects of temperature and temperature variations.
5. Have the same thickness of the line pipe insulation layer.
It is a kind of connecting pipe fitting what is widely used on anti-corrosion, especially on Directly buried pre-insulated pipes field joint. It is made by Polyethylene sheets complex with the electro-fusion wire
Application:
1. District thermal heating system construction,
2. Pre-insulated pipes field joint welding and oil pipes joint welding;
3. Preinsulated bonded pipe system for directly buried hot water networks;
4. Three PE/PP layers with foam jacket insulation pipes connection;
5. Steel pipes anti-corrosion etc.
Performance:
1. Waterproof; High adhesion, good airtightness, corrosion resistant capacity, long service life and convenient operation
2. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
3. Able to withstand radial forces and bending moments;
4. Able to withstand effects of temperature and temperature variations.
5. Have the same thickness of the line pipe insulation layer.
| Specification | |||||
| Steel pipe outside diameter (mm) | PE outside casing diameter (mm) | Width(mm) | Tic.mm | ||
| DN159 | 285 | 600 | 4 | ||
| DN219 | 315 | 600 | 4 | ||
| DN273 | 365 | 600 | 4 | ||
| DN325 | 420 | 600 | 5 | ||
| DN377 | 500 | 600 | 5 | ||
| DN426 | 550 | 600 | 6 | ||
| DN478 | 630 | 600 | 6 | ||
| DN529 | 655 | 600 | 6 | ||
| DN630 | 760 | 600 | 8 | ||
| DN720 | 850 | 600 | 8 | ||
| DN820 | 960 | 600 | 10 | ||
| DN920 | 1054 | 600 | 10 | ||
| DN1020 | 1155 | 600 | 12 | ||
| DN1220 | 1380 | 600 | 12 | ||
| Technical Data: | |||||
| All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997 | |||||
| Final Test | Unit | Standard | Test Result | Result | |
| Raw material density | g/cm 3 | ≥0.935 | ≤0.961 | PASS | |
| Raw material melt flow rate | g/10min | ≤0.50 | 0.46 | PASS | |
| Appearance check | / | Inernal and external surfaces is clean and free from other defects. | Pass | PASS | |
| Heat reversion | % | ≤3;shall not show any cracks | 0.89,No cracks | PASS | |
| Tensile yield strength | Mpa | ≥19 | 20.2 | PASS | |
| Elongation at break | % | ≥350 | 656 | PASS | |
| Stress crack resistance | h | ≥300 | Pass | PASS | |
